{"@context":"http:\/\/schema.org\/","@id":"\/products\/amflow-pr-carbon-pro-2027#product","@type":"ProductGroup","brand":{"@type":"Brand","name":"Amflow"},"category":"Electric Bikes","description":"Please contact for an accurate ETA\nThe Amflow PR Carbon Pro is the top-spec model in the PR Carbon range. It shares the same full-carbon frame, adjustable geometry system and Avinox smart platform as the standard PR Carbon, but steps up in three meaningful areas: a more powerful Avinox M2S motor, a premium FOX suspension package, and Magura brakes. The result is a bike built firmly for riders who regularly push into more demanding terrain and want their equipment to match.\nThe Avinox M2S drive unit is a notable upgrade over the M2. It delivers 150N·m of peak torque and up to 1500W of peak power in Trail, Turbo, Auto and Boost modes — considerably more output than the standard model, and the kind of figure that makes itself felt on sustained technical climbs. Despite the power increase, noise remains impressively low at 45dBA, thanks to compound planetary gears and a helical gear design. SmoothShift integrates the motor with the SRAM S1000 Eagle Transmission electronic drivetrain, allowing gear changes while coasting and keeping momentum when the trail demands it.\nThe 800Wh removable battery can be charged independently of the bike or swapped entirely. The Pro comes with Amflow's 508W fast charger (12A) as standard, which can charge the battery to 80% approximately three times faster than the 168W charger supplied with the standard model — a genuinely useful inclusion if you're riding back-to-back days or fitting rides around a busy schedule.\nSuspension is a clear step up. Up front is a FOX 36 Performance fork (MY 2027) with a GRIP damper and 160mm of travel — a more capable unit than the AWL HD Sport on the standard model, particularly on bigger impacts and rougher, more varied terrain. The rear runs a FOX Float X Performance shock (MY 2027) with a 2-position lever, allowing you to switch between open and firm damping on the fly without stopping. Both are custom-tuned to the PR Carbon's kinematics. The mullet setup continues here — 29-inch front, 27.5-inch rear — with Schwalbe Magic Mary Radial 29×2.5 (Gravity Pro, Ultra Soft, tubeless ready) on the front and Schwalbe Albert Radial 27.5×2.5 (Gravity Pro, Addix Soft, tubeless ready) on the rear. Both are gravity-focused tyres designed for maximum traction in demanding conditions.\nBraking comes from Magura Gustav Pro four-piston hydraulic disc brakes with 203mm rotors. The Gustav Pro is a well-regarded gravity brake with a firm, progressive lever feel and strong modulation — a meaningful upgrade over the standard model's Tektro spec. The rest of the build — SRAM S1000 Eagle drivetrain, Avinox 2-inch OLED Control Display, Apple Find My tracking, offline navigation, Amflow dropper post and the full geometry adjustment system — is consistent across the PR Carbon range.\nAt £5,399 the Pro sits £1,400 above its sibling. The difference is accounted for by the M2S motor, the FOX 36 and Float X Performance suspension package, the Magura brakes and the fast charger — all components that make a tangible difference when the riding gets serious.\nFeatures\n\nFull carbon frame, approximately 2.9kg (Size M) — available in Basalt Grey\nAvinox M2S drive unit — 130N·m nominal torque, 150N·m peak torque, up to 1500W peak power; 45dBA whisper-quiet operation\n800Wh removable battery — charge in the bike or remove for swapping or home charging\n508W fast charger included — charges to 80% approximately 3× faster than the standard 168W charger\nFOX 36 Performance fork (MY 2027) — 160mm travel, GRIP damper, Sweep\/LSR adjustment, custom-tuned\nFOX Float X Performance rear shock (MY 2027) — 210×55mm, 2-position lever, LSR adjustment, custom-tuned\n29-inch front \/ 27.5-inch rear (mullet) wheel setup on Amflow XMA-30 alloy rims with SAPIM E-Light spokes\nSchwalbe Magic Mary Radial 29×2.5 (Gravity Pro, Ultra Soft, tubeless ready) front tyre and Schwalbe Albert Radial 27.5×2.5 (Gravity Pro, Addix Soft, tubeless ready) rear tyre\nMagura Gustav Pro four-piston hydraulic disc brakes, 203mm rotors\nSRAM S1000 Eagle Transmission electronic drivetrain — 38T chainring, 10-52T cassette, AXS Pod Controllers\nSmoothShift — shift gears while coasting, deeply integrated with the Avinox drive system\nAvinox 2-inch OLED Control Display — offline navigation, Apple Find My tracking, OTA updates, Bluetooth\nAuto mode and Boost mode for intelligent or maximum power assistance\n40 adjustable geometry configurations — head tube angle, bottom bracket height and chainstay length all independently adjustable\nAmflow dropper post with adjustable travel shim (190mm \/ 210mm \/ 230mm depending on frame size)\nIncludes Avinox front light, bottle cage, torque wrench, shock pump, pedals and clear frame protection film\n\nSizing\nThe Amflow PR Carbon Pro is available in four frame sizes. The height ranges below are a useful starting point, but where sizes overlap, reach is the most important measurement for fit — a longer reach suits riders who prefer a more stretched, aggressive position, while a shorter reach works better for those who prefer to sit more upright.\n\n\nM — 157–173cm (5'2\"–5'8\") — Reach: 452mm, Stack: 626mm\n\nL — 173–183cm (5'8\"–6'0\") — Reach: 475mm, Stack: 637mm\n\nXL — 180–191cm (5'11\"–6'3\") — Reach: 500mm, Stack: 649mm\n\nXXL — 191–198cm (6'3\"–6'6\") — Reach: 527mm, Stack: 662mm\n","hasVariant":[{"@id":"\/products\/amflow-pr-carbon-pro-2027?variant=57319008797055#variant","@type":"Product","image":"https:\/\/projektride.co.uk\/cdn\/shop\/files\/pr-carbon-pro-2027-basalt-grey-m-1231652487.jpg?v=1775815421\u0026width=1920","name":"Amflow PR Carbon Pro 2027 - Pre order - Medium","offers":{"@id":"\/products\/amflow-pr-carbon-pro-2027?variant=57319008797055#offer","@type":"Offer","availability":"http:\/\/schema.org\/InStock","price":"5399.00","priceCurrency":"GBP","url":"https:\/\/projektride.co.uk\/products\/amflow-pr-carbon-pro-2027?variant=57319008797055"}},{"@id":"\/products\/amflow-pr-carbon-pro-2027?variant=57319008829823#variant","@type":"Product","image":"https:\/\/projektride.co.uk\/cdn\/shop\/files\/pr-carbon-pro-2027-basalt-grey-m-1231652487.jpg?v=1775815421\u0026width=1920","name":"Amflow PR Carbon Pro 2027 - Pre order - Large","offers":{"@id":"\/products\/amflow-pr-carbon-pro-2027?variant=57319008829823#offer","@type":"Offer","availability":"http:\/\/schema.org\/InStock","price":"5399.00","priceCurrency":"GBP","url":"https:\/\/projektride.co.uk\/products\/amflow-pr-carbon-pro-2027?variant=57319008829823"}},{"@id":"\/products\/amflow-pr-carbon-pro-2027?variant=57319008862591#variant","@type":"Product","image":"https:\/\/projektride.co.uk\/cdn\/shop\/files\/pr-carbon-pro-2027-basalt-grey-m-1231652487.jpg?v=1775815421\u0026width=1920","name":"Amflow PR Carbon Pro 2027 - Pre order - Extra Large","offers":{"@id":"\/products\/amflow-pr-carbon-pro-2027?variant=57319008862591#offer","@type":"Offer","availability":"http:\/\/schema.org\/InStock","price":"5399.00","priceCurrency":"GBP","url":"https:\/\/projektride.co.uk\/products\/amflow-pr-carbon-pro-2027?variant=57319008862591"}},{"@id":"\/products\/amflow-pr-carbon-pro-2027?variant=57319008895359#variant","@type":"Product","image":"https:\/\/projektride.co.uk\/cdn\/shop\/files\/pr-carbon-pro-2027-basalt-grey-m-1231652487.jpg?v=1775815421\u0026width=1920","name":"Amflow PR Carbon Pro 2027 - Pre order - Extra Extra Large","offers":{"@id":"\/products\/amflow-pr-carbon-pro-2027?variant=57319008895359#offer","@type":"Offer","availability":"http:\/\/schema.org\/InStock","price":"5399.00","priceCurrency":"GBP","url":"https:\/\/projektride.co.uk\/products\/amflow-pr-carbon-pro-2027?variant=57319008895359"}}],"name":"Amflow PR Carbon Pro 2027 - Pre order","productGroupID":"15633029169535","url":"https:\/\/projektride.co.uk\/products\/amflow-pr-carbon-pro-2027"}
Shake bottle well before use. Ensure that all surfaces have been thoroughly washed and dried.Angola (GBP£)
Apply Bike Ceramic to the applicator pad included in the kit and coat the frame. Leave the coating for 1-2 minutes.
Remove all residue with a microfibre and leave to cure for 24 hours in a cool, dry place. Do not wash for 7 days after application.Armenia (AMDդր.)
If opened, use within 3 months, if unopened, use within 12 months
Included in the box; x2 Microfibre Towels, x1 UltraSoft Foam Filled Applicator pad, x1 pair of latex free gloves, x1 bottle of Bike Frame Prep, x1 tincture of Bike Ceramic.Ascension Island (SHP£)
) where on of the team will be more than happy to help.
ProjektRide Bike Shop EdinburghBritish Indian Ocean Territory (USD$)